Douglas Danish Oil is a blend of oils including tung oil, which provides an attractive lustre finish to all woods. This oil is ideal for Scandinavian furniture, doors, panelling and wood turnings. This oil is also an excellent treatment for wooden kitchen worktops and oak timbers due to it’s low toxicity and water repellence. It is suitable for inside and outside use.
For sealing and varnishing all types of interior timbers and sometimes used externally on hardwood garden furniture. If using on bare wood one would normally look to apply three coats to give a hard, water-resistant low-sheen finish. When project is fully dry, buff surfaces with a lint free cloth and wipe over with a damp cloth to maintain. If used externally one should bear in mind that it gives no UV protection to the underlying timber so you may need to apply oil once a year. Apply by brush or cloth and wipe of any excess oil after 15 minutes to avoid too long a drying time. Only re-apply when the previous coat is dry (allow a minimum of 4 hours between coats). If using a large container size it is very important to keep stirring the oil when using, as the drying agent in the oil has a tendency to sink to the bottom. If this happens, then when you apply the remnants of the container it has too much of the drying agent and it appears as a white residue which is extremely difficult to rectify.
- Suitable for kitchen worktops
- Gives an attractive lustre finish
- Water repellent
- Low toxicity
